Water Leak Detection
For Businesses
Early Leak Detection That Helps Prevent Downtime
SMART WATER SENSORS
& WATER SHUT-OFF VALVES
Meet the Smart Water Device Lineup
A low-profile water detector that sits on the floor in tight leak zones and triggers alerts the moment moisture is detected, with on-device audible and LED warning for quick on-site response.
A flood detector with a remote probe on a cable, designed to catch water at low points under sinks, near equipment, and in mechanical rooms, while the main unit mounts higher for reliable signalling and monitoring.
A clamp-on motorized shutoff that mounts to an existing quarter-turn main water valve and can automatically close the water supply when a leak is detected, helping stop damage at the source.
The Second Water Shows Up, You Know
One Dashboard.
Every Leak Zone. Every Location.
Automations
That Do the Work for You
Cover the High-Risk Zones
That Cost the Most
Contain the Leak
Cut the loss.
Leak Detected.
Water Off. Damage Stopped.
Detect Leaks
and Freeze Risk in Tight Spaces
Alerts On-Site
Not Just on a Phone
Reduce Risk
Strengthen Your Insurance Story
What Businesses Say About Our Water Sensors
“We got the alert right away and handled the leak before it spread. No downtime, no restoration crew.”
Jerry – Pickering, Ontario
“We manage multiple locations. Having alerts in one app and consistent setup across sites is huge.”
Percy T – Oakville, Ontario
Water Detection FAQs for Businesses
Q: What’s included in a water detection setup?
Q: Do I get alerts on my phone?
Q: Can multiple staff members receive alerts?
Q: Can it shut off water automatically?
Q: What’s the difference between the Smart Water Sensor and the Smart Water Tile?
Q: Where should sensors be installed first?
Q: Does the Smart Water Tile detect freezing risk?
Q: Can this work for multiple business locations?
Q: Will this lower my insurance premium?
Water Leak Detection
for Businesses
Early Leak Detection That Helps Prevent Downtime
SMART WATER SENSORS | WATER SHUT-OFF VALVES
Meet the Smart Water Device Lineup
A flood detector with a remote probe on a cable, designed to catch water at low points under sinks, near equipment, and in mechanical rooms, while the main unit mounts higher for reliable signalling and monitoring.
The Second Water Shows Up,
You Know
Notifications
Real-time push alerts to phones
Alert The Right People
Send alerts to multiple people at once (manager, maintenance, owner)
Viewable History
Activity history for accountability and follow-up
One Dashboard.
Every Leak Zone. Every Location.
Monitoring only works if it’s consistent. This setup gives you a clear view of water risk across your building, with the ability to scale from one utility room to an entire portfolio without turning it into a daily babysitting job.
Monitor multiple leak zones across the same building
Central view for multi-site businesses and property managers
See device status so you know what’s online and protected
Track events over time to spot repeat issues and problem areas
Add detection as you grow without rebuilding the system
Automations
That Do the Work for You
Configure simple rules so the system reacts the way your business actually runs. Less manual effort, faster response, and fewer “who saw the alert?” moments.
Trigger actions automatically when water is detected
Set who gets notified, and when
Different rules by area (kitchen vs mechanical room)
Multi-site control from one app login
Event history to track patterns and repeat issues
Cover the High-Risk Zones
That Cost the Most
Mechanical Rooms
Boilers, Pumps, Expansion Tanks
Water Heater Rooms
Under Sinks & Cabinets
Commercial Kitchens
Restrooms
Server Rooms
Power and Networking Risk
Sump Pump Pits
Sprinkler Riser Rooms
Vales, Risers, Fittings
Elevator Pits
Water Can Disable Elevators Quickly
Laundry & Utility Areas
Washers, Mop Sinks, Utility Taps
Contain the Leak
Cut the loss.
Detection is good. Containment is better. Pair sensors with the Smart Water Shut-off to stop water flow at the source and limit how far damage spreads.
Optional automatic shut-off when a leak is detected
Reduce damage to flooring, drywall, inventory, and equipment
Less downtime, fewer emergency calls, fewer surprises
Ideal for after-hours and unattended areas
Leak Detected.
Water Off. Damage Stopped.
The Smart Water Shut-off can close your main water supply automatically when leak sensors trigger, helping stop damage at the source before it spreads.
Automatic shut-off when paired sensors detect water
Remote shut-off control for emergencies
Helps protect multi-tenant and multi-floor buildings
Best for after-hours protection and unattended spaces
Detect Leaks
and Freeze Risk in Tight Spaces
The Smart Water Tile sits low and flat where leaks start, and it can also detect freeze-risk conditions in vulnerable areas so you can act before pipes become a problem.
Alerts On-Site
Not Just on a Phone
When water is detected, the Smart Water Tile can sound an audible alert and flash a red LED. That means staff nearby can respond immediately, even if nobody checks their phone.
Reduce Risk
and Strengthen Your Insurance Story
What Businesses Say About Our Water Sensors
“We got the alert right away and handled the leak before it spread. No downtime, no restoration crew.”
Jerry – Pickering, Ontario
“We manage multiple locations. Having alerts in one app and consistent setup across sites is huge.”
Percy T – Oakville, Ontario
“The automatic shut-off is the game changer. It turns a leak into a maintenance task, not a disaster.”
Kim K – Mississauga, Ontario
