Outdoor Siren with Strobe

Home » Support » Resources » Outdoor Siren with Strobe Resources

Specs

Different alerts for fire, carbon monoxide, burglary and flood events
110db siren output
915MHz frequency band
Strobe light functionality for visual indication
Fully supervised
Uses 3.6V lithium battery
Has LED indicator to show signal strength
UL/UCL, FCC, CE certified
Operating Temperature: -33° C to 70° C (-27.4° F to 158° F)

Colours

Documentation

Data Sheet

Features That Make A Difference

PowerG* robust industry-leading commercial-grade wireless technology

• Sleek design and robust weatherproof
housing (IP55)

• 110 dB siren with strobe light

• Long-life lithium batteries

• Compatible with PowerSeries Neo systems

The power of PowerG

The power behind PowerSeries Neo lies in various innovative technologies, including the revolutionary PowerG, which, bundled together, provides a robust and feature-rich platform designed to reduce operational costs for dealers and provide ultimate reliability for end users.

• Multichannel, Frequency Hopping Spread Spectrum technology – to overcome frequency blocking and interference

• Adaptive Transmission Power – for battery life preservation

• High transmission ranges – for reliable communication within up to 2km/2187 yards line-of-sight

• TDMA synchronized communication technology – to prevent message collisions

• 128 bit AES encryption – high level protection against analysis tools and digital attacks

Weather-Proof Design

The Outdoor Siren provides an Ingress Protection (IP) of IP55. An Ingress Protection Rating provides information on how well the siren is equipped to withstand the elements to which it is exposed.

A rating of IP55 in particular ensures the unimpaired functionality of the Outdoor Siren PowerG wireless outdoor siren in the presence of dust and water jets.

Frequently Asked Questions

How do I know if my Outdoor Siren with Strobe works with my Qolsys system?

The Outdoor Siren with Strobe is compatible with supported Qolsys panels. The easiest way to confirm compatibility is to check your panel model in the Grand Alarms Smart Home App or contact Grand Alarms support with your panel information before adding or replacing the siren.

How do I arm my system so the Outdoor Siren with Strobe will activate if there is an alarm?

The siren will activate when your system is properly armed and a programmed alarm event occurs. You can arm your system from your Qolsys touchscreen panel or through the Grand Alarms Smart Home App. Make sure the siren has been enrolled and programmed correctly in the system.

How do I stop the Outdoor Siren with Strobe after an alarm goes off?

You can stop the siren by disarming your security system at the Qolsys panel or through the Grand Alarms Smart Home App. If the siren does not stop after disarming, the system may need to be checked for programming, communication, or tamper issues.

How do I know if the Outdoor Siren with Strobe battery is low?

If the siren battery is low, your system will usually show a low battery trouble condition on the Qolsys panel and may also send a notification through the Grand Alarms Smart Home App. If you see a low battery warning, contact Grand Alarms for service or replacement guidance.

How do I test if my Outdoor Siren with Strobe is working properly?

The best way to test the siren is through a system test performed from the Qolsys panel or with guidance from Grand Alarms support. Do not repeatedly trigger full alarm events just to test it. A proper test should confirm communication, siren response, and strobe function without causing unnecessary panic.

How do I know if my Outdoor Siren with Strobe has lost connection to the panel?

If the siren loses communication, your Qolsys panel may display a trouble, supervisory, or device communication message. You may also receive a notification through the Grand Alarms Smart Home App depending on your setup. This usually means the siren needs to be checked for signal strength, battery condition, or enrollment status.

How do I tell the difference between a burglary alarm and other alarm events on the Outdoor Siren with Strobe?

The Outdoor Siren with Strobe can be programmed to use different audible and visual responses for different alarm types, such as burglary, fire, carbon monoxide, or flood. The exact behavior depends on how your Qolsys system is programmed. Grand Alarms can confirm how your siren is set up.

How do I know where the Outdoor Siren with Strobe should be installed?

The siren should be installed in a location where it can be heard clearly outside, seen easily when the strobe flashes, and still maintain strong wireless communication with the Qolsys panel. Good placement matters. If the siren is tucked away in a bad spot, you lose half the benefit.

How do I replace the battery in my Outdoor Siren with Strobe?

Battery replacement should be done carefully so the siren stays protected and properly sealed for outdoor use. In most cases, it is best handled by Grand Alarms service or someone familiar with the device. Opening it incorrectly can create tamper trouble conditions or weaken the outdoor seal.

How do I know if the strobe light is supposed to flash during every alarm?

The strobe behavior depends on how the siren is programmed in your Qolsys system. In many setups, the strobe is used during alarm events to provide a visible exterior alert. If you are unsure whether your strobe should flash for burglary only or for other alarm types too, Grand Alarms can confirm your programming.

Refer a Friend or Family Member

When someone you refer joins Grand Alarms, you’ll receive 2 months of free service as a thank-you.

Need More Help?